Switch power amplifier, vary power choice and impedence. High sensitivity.

 

SPECIFICATION	DP 1	DP 3	DP 5	DP 7	DP 9
8Ω Stereo Output Power	300W	500W	800W	1000W	1200W
4Ω Stereo Output Power	450W	750W	1200W	1500W	1800W
2Ω Stereo Output Power	580W	980W	1500W	1950W	2300W
8Ω Bridge Output Power	900W	1500W	2400W	3000W	3600W
4Ω Bridge Output Power	1160W	1960W	3000W	3900W	4600W
Frequency Response	20Hz-20KHz
THD+N(20Hz-20KHz)	<0.05%	<0.05%	<0.08%	<0.08%	<0.08%
Slew Rate	30V/μs	30V/μs	35V/μs	40V/μs	42V/μs
Damping Factor(8Ω, 20Hz-1KHz )	400
Voltage Gain (8Ω rated power)	36dB	38.2dB	40.2dB	40.8dB	42dB
Output circuitry	Class AB	Class H	Class H	Class H	Class H
Signal to Noise Ratio	>90dB	>90dB	>95dB	>95dB	>95dB
Crosstalk(20Hz-20KHz)	>70dB
Input Sensitivity (8Ω)	0.775V/1.0V/1.4V
Input Impedence	20KΩ balance / 10 KΩ unbalance
Cooling	Two variable speed fans, rear-to-front air flow
Connectors (each channel)	Input : XLR Output: Speakon
Controls	Front: AC switch, CH 1 and CH2 gain knobs; Rear: Sensitivity switch, GND switch, Stereo/Parallel/Bridge switch 30Hz low cut switch, clip limiter switch, 150 Hz low pass switch
Indicators	Front: POWER-blue LED, SIGNAL-green LED, CLIP-Red LED, PRO-Red LED, Rear: BRIDGE-orange LED
Amplifier Protection	Short circuit, thermal, overload, clip limiter, DC Voltage, soft start, ultrasonic and RF protection
Net Wight / Gross Weight	10kg/12kg	10kg/12.5kg	11kg/13kg	12kg/14kg	132kg/15kg
Demension (mm)	483x462x89mm
Packing dimensions	560x580x150mm
Power Requirements	100V, 120V, 220V, 240V, 50-60Hz